Branch Tap Insulated Piercing Connector for ABC Overhead Power Lines
|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Technics: | Injection Molding |
| Standard: | GB |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Find Similar Products
Basic Info.
- Usage
- Line Fittings
- Type
- Terminal Clamp
- Blade
- Aluminum/Copper/Brass
- Piercing Depth
- 2.5-3.5mm
- Material
- PA66
- Transport Package
- Carton/Pallet
- Trademark
- YOPU
- Origin
- China
- HS Code
- 7616991090
- Production Capacity
- 300000/Per Month
Product Description
• Piercing connector, simple installation, need not strip the cable coat.
• Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
• Adopted special connecting tablet, apply to joint of Cu (Al) and Cu (Al) or Cu and Al.
• Small electric connecting resistance,connecting resistance less than 2.5 times of the resistance of branch.
• Special insulated case body, resistance to ilumination and environmental aging, the insulation strengthcan up to 12kv.
• Arc Surface design, apply to connection with the same (different) diameter, wide connection scope(0.75mm2-400mm2/ td)
Description
• Piercing connector, simple installation, need not strip the cable coat.
• Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
• Adopted special connecting tablet, apply to joint of Cu (Al) and Cu (Al) or Cu and Al.
• Small electric connecting resistance,connecting resistance less than 2.5 times of the resistance of branch.
• Special insulated case body, resistance to ilumination and environmental aging, the insulation strengthcan up to 12kv.
• Arc Surface design, apply to connection with the same (different) diameter, wide connection scope(0.75mm2-400mm2/ td)
Features
Made of hard, corrosion resistant aluminum alloy
Tested according to international and many national standards
Teeth either of pure aluminum or tin-plated aluminum
Construction
Component:Material
Body:Tin coated corrosion resistant aluminum alloy
Washer:Conical spring washer
Screw:Hot dip galvanized
Cover:Weather and UV-radiation resistant plastic
Installation:Remove conductor inlet caps according to the connection to be made. Open the upper lid.Unscrew the screw until the conductors can be placed into the connector. Tighten the screw until the shearhead breaks. Shut the upper lid.
1.Adjust the connector nut tosuitable location.
2.Put the branch wire in to thecap sheath fully.
3.Insert the main wire if there are two laysof insulated lay in the main cable, shouldstrip a certain length of the first insulatedlay from inserted end.
4.Turn the nut by hand, and fix the connector in suitable location.
5.Screw the nut with the sleeve spanner.
){kind=link}
Send your message to this supplier
People who viewed this also viewed
Product Groups
Find Similar Products By Category
- Supplier Homepage
- Products
- Cable Clamp
- Insulation Piercing Connector
- Branch Tap Insulated Piercing Connector for ABC Overhead Power Lines
Related Categories
Hot Searches
- China Connector Factories
- Wire Connector Factories
- Connector Cable Factories
- Electric Connector Factories
- Wire Cable Connector
- Copper Insulation Cable Connector
- Terminal Insulation Cable Connector
- Clamp Wire Connector
- Electrical Clamp Connector
- Top 10 Connector
- Connector Trends
- Insulation Piercing Connector Bulkbuy